Convert G26 trigger to TP9Sa

Modifications, Tutorials, Gunsmithing, Instructional and "How To" articles, write ups and videos.
Post Reply
HarlemKnight
Member
Posts: 16
Joined: Mon Jun 25, 2018 10:20 am
Location: Atlanta
x 3
x 5

Convert G26 trigger to TP9Sa

Post by HarlemKnight » Thu Jul 12, 2018 6:28 pm

I like my Canik TP9Sa trigger.

I want to convert my Glock 26 trigger into something similar.

What would be the best way to go about doing that? I'm about to start researching this. Chime in if you can give me a jumpstart or point me in the right direction.

I will update my notes here too.
0 x
TP9SA w/TLR8 ()

User avatar
TL1000RSquid
Global Moderator
Posts: 172
Joined: Wed Apr 25, 2018 3:24 pm
Founding Member #: 007
Location: Texas
x 13
x 72

Re: Convert G26 trigger to TP9Sa

Post by TL1000RSquid » Thu Jul 12, 2018 7:33 pm

Only way you'll get it close is a complete trigger system upgrade. You can do springs and connector which is what I do on my Glocks but its still not like the SA. I'm not sure who makes the best trigger kit upgrade though.
0 x

User avatar
Cole Dedhand
Member
Posts: 21
Joined: Wed Jul 04, 2018 2:08 pm
Location: Phoenix
x 8
Contact:

Re: Convert G26 trigger to TP9Sa

Post by Cole Dedhand » Fri Jul 13, 2018 8:49 am

Thete are 7,364 different aftermarket triggers for Glocks. I bet some of those guys on the Glock forums have already talked about them.
0 x
When you pry the gun from my cold dead hands, don't grab it by the barrel. It will be very hot.

Post Reply